Horizontal Heavy Duty Gap-bed Lathe (Turning Machine)
DL-1000
DL-1250
DL-1400
DL-1600
Features:
These lathes can perform to turn end-faces, cylindrical surfaces and internal holes of various parts as well as metric, inch, module and pitch threads.
The top slides can be operated individually by power for cutting short taper surface, also can be turned automatically through the compound movement combining longitudinal feed with the top slide feed, moreover, the machines may be used for drilling, boring and trepaning.
The machine tools are characteristics of power, high spindle speed, high rigidity.
The various ferrous and non-ferrous metals parts may be turned through the heavy cutting by carbon alloytools.
Technical Parameter:
Standard Accessories:
Four jaw chuck Φ1000mm(1 set)
Steady rest Φ70-480(1 set, for more than 2000mm)
Follow rest(1 set, for more than 2000mm)
Morse No.6 center(1 set)
Center bush(1 set)
Tools(1 set)
Foundation screws(1 set)
Optional Accessories:
Steady rest(Φ400-Φ700mm)
Four jaw chuck Φ1250mm
Taper-turning device
Metric chassing dial device
Inch chassing dial device
Inch lead screw
T-type tool post-
DL-1000
DL-1250
DL-1400
DL-1600
Features:
These lathes can perform to turn end-faces, cylindrical surfaces and internal holes of various parts as well as metric, inch, module and pitch threads.
The top slides can be operated individually by power for cutting short taper surface, also can be turned automatically through the compound movement combining longitudinal feed with the top slide feed, moreover, the machines may be used for drilling, boring and trepaning.
The machine tools are characteristics of power, high spindle speed, high rigidity.
The various ferrous and non-ferrous metals parts may be turned through the heavy cutting by carbon alloytools.
Technical Parameter:
| Specification | Unit | DL-1000 | DL-1250 | DL-1400 | DL-1600 |
| Capacity | |||||
| Max. swing diameter over bed | mm | 1040 | 1250 | 1440 | 1640 |
| Max. swing diameter over cross slide | mm | 650 | 900 | 920 | 1030 |
| *Max. swing diameter over gap | mm | 1400 | 1740 | 1890 | 2090 |
| Width of bed | mm | 755 | |||
| Max. length of workpiece | mm | 1000/2000/3000/4000/5000/6000/7000/8000/9000/10000 | |||
| Spindle | |||||
| Spindle nose | - | A15 | |||
| Spindle bore diameter | mm | 130 | |||
| Spindle taper | - | Metric No.140 | |||
| Spindle speed range | rpm | 3.15-315(21steps)CCW; 3.5-290(12steps)CW | |||
| Feed | |||||
| Longitudinal feed speed | mm/r | 0.1-12(56kinds) | |||
| Transversal feed speed | mm/r | 0.05-6(56kinds) | |||
| Metric threads range | mm | 1-120(44kinds) | |||
| Inch threads range | TPI | 3/8-28(31kinds) | |||
| Module threads range | mm | 0.5-60(45kinds) | |||
| Pitch threads range | DP | 1-56(25kinds) | |||
| Tailstock | |||||
| Tailstock quill taper | - | Metric No.80 | |||
| Tailstock quill travel | mm | 300 | |||
| Diameter of tailstock quill | mm | 160 | |||
| Power | |||||
| Main motor power | kw | 22 | |||
| Coolant pump power | kw | 0.125 | |||
Standard Accessories:
Four jaw chuck Φ1000mm(1 set)
Steady rest Φ70-480(1 set, for more than 2000mm)
Follow rest(1 set, for more than 2000mm)
Morse No.6 center(1 set)
Center bush(1 set)
Tools(1 set)
Foundation screws(1 set)
Optional Accessories:
Steady rest(Φ400-Φ700mm)
Four jaw chuck Φ1250mm
Taper-turning device
Metric chassing dial device
Inch chassing dial device
Inch lead screw
T-type tool post-